Diversity is only limited by imagination

NEUTRAL SILICONE OLIVE C-22

Neutral silicone with a low modulus of elasticity for sealing gaps between porous and non-porous substrates
Silikon_OLIVE_C-22_EN

logo2logo1

MATERIALS:
  • One-component high quality silicone sealant with a low elasticity, naturally cured, supplied in cartouches or plastic packaging
  • White/colorless color
  • Adheres well to many building materials without primer, except: Teflon, polyethylene and polypropylene surfaces
  • Characterize by high resistance to UV radiation, weather conditions and aging.
INSTALLATION:
  • The surface on which the application is made must be free of dust, dirt and oil
  • Non-porous surfaces such as aluminum or glass should be cleaned with a suitable solvent
  • Porous surfaces, such as concrete or brick, should be mechanically cleaned
  • It is recommended to use primer for better grip. An adhesion test is recommended each time
  • After surface preparation, the silicone is applied using a suitable injection gun. The joints should be processed and smoothed before forming the epidermis
  • For the deep gaps, the possibility of moving the silicone should be considered
  • The silicone can’t be painted
  • Uncured silicone can be removed with solvents such as isopropyl alcohol or mineral spirits
  • Detailed information on storage, transport and safety are available in the safety data sheet (SDS).
Silikon OLIVE C-22 600_1_140x360
Product code EAN code Kind Volume Application Expiry date Color Single box Outer cartoon
ml - months - pcs. pcs.
12021412G04F04 5903111917777 FOIL TUBE 600 FOIL TUBE EXTRUDER 12 WHITE 1 20
OLI000159 - CARTOUCHE 300 INJECTION GUN 12 WHITE 1 24
12021412G04T30 5903111917784 FOIL TUBE 600 FOIL TUBE EXTRUDER 12 COLORLESS 1 20
12023411C03T01 5902431720395 CARTOUCHE 300 INJECTION GUN 12 COLORLESS 1 24
Properties Unit Value
Tack free time minute 5-10
Curing time mm/24h about 3
Dead weight g/ml about 1
Resistance to flow (ISO 7390 ) mm about 0
Application temperature °C from +5 to +40
Working temperature °C from -40 to +150
Hardness (Shore A) (ISO 868 ) - about 18
TENSILE STRENGTH:
Joint 12x12x50 mm – ISO 8339
Modulus of elasticity at 100% elongation (ISO 8339 ) Mpa about 0,35
Tensile strength (ISO 8339 ) Mpa about 1,30
Elongation at break (ISO 8339 ) % >550
The following values were obtained at temperature +23°C and 50% relative humidity, unless stated otherwise.

Connected products. Do not forget about accessories!!!

WANT TO KNOW MORE? DOWNLOAD OUR CATALOG
kolezanka