Diversity is only limited by imagination

PENOSIL PREMIUM FIRERATED GUNFOAM B1

Professional, firestop pistol foam for filling gaps
PENOSIL_FireRated_GunFoam_B1_EN

logo2logo1

MATERIALS:
  • One-component professional fire-resistant foam with a structure of 70% / 30% (closed cells / open cells) and low expansion, supplied in cans with aerosol
  • Light pink color
  • Available in summer version
  • Adheres well to many building materials, except: Teflon, polyethylene and silicone surfaces
  • Provides very good sound and thermal insulation
  • Class B-s1, d0 reaction to fire acc. PN-EN 13501-1+A1:2010.
INSTALLATION:
  • The surface on which the application is made must be free of dust, dirt and oil
  • The surface on which the application will be made should be well moistened. Lack of adequate humidity can cause secondary expansion
  • Used for gaps or linear joints up to 50 mm wide
  • Applied on substrates of at least A2 reaction to fire
  • When applying in low temperatures, the can with foam should be preheated in a warm place or water. Place or water temperature should not exceed + 30 ° C
  • Before use, shake the can with foam vigorously at least 20 times
  • The amount of foam discharged should be adjusted with use of the injection gun trigger.
  • After curing, the foam is not UV-resistant and must be covered within 24 hours. Unprotected foam gets brittle. The foam can be painted with water-based paints
  • Dirt from foam can be cleaned with Premium Foam Cleaner, Premium Foam Remover or with Premium Cleaning Wipes. Details are given in the cards of these products
  • Detailed information on storage, transport and safety are available in the safety data sheet (SDS).
FireRated_GunFoam_B1_1_140x360
Product code EAN code Kind Working temperature Volume Application Expiry date Version Package Outer cartoon
MIN MAX
- °C °C ml - months - pcs. pcs.
A1592 4742640006948 CAN WITH FOAM +5 +30 750 INJECTION GUN 12 FIRESTOP 1 12
Properties Unit Value
Tack free time minute 12-16
Cutting time (30 mm strap) minute 30-40
Cutting time (30 mm strap)°C) hour up to 18
Completely cured in joint (in temperature +5 °C) hour up to 24
Density kg/m3 25-30
Fire-resistance of cured foam (PN-EN 13501-2:2010 ) EI15 - EI120
Fire class of cured foam (PN-EN 13501-1+A1:2010 ) - B-s1,d0
Volume decrease % non
Post-expansion % up to 30
Flash point of cured foam °C 400
Tensile strength (BS 5241 ) N/cm2 8
Compression strength at 10% deformation (DIN 53421 ) N/cm2 2,5
Thermal conductivity W/m*K 0,034
Temperature resistance of cured foam °C long period: -50 to +90
The following values were obtained at temperature +23°C and 50% relative humidity, unless stated otherwise.

Fire-resistance is tested and rated in accordance with PN-EN 13501-2:2010

Joint depth mm ≥100 ≥100 ≥100 ≥100 ≥200 ≥200 ≥200 ≥200
Joint width mm ≤40 ≤30 ≤20 ≤10 ≤40 ≤30 ≤20 ≤10
EI min 45 45 60 60 120 120 150 180

Connected products. Do not forget about accessories!!!

WANT TO KNOW MORE? DOWNLOAD OUR CATALOG
kolezanka